Our cubicles are supplied with all hardware required as shown below


( or you can order the cubicle without the hardware if you wish to )



The hardware supplied with MFC cubicles

Melamine faced chipboard


Further information regarding the suggested fittings required can be be seen on our information page


Stainless Steel --- Upgrades Available  


Leg Support, Rotary indicator,  Hinges and Brackets


We calculate the hardware required for your cubicle order and supply these to you on delivery.

Normally one leg support is fitted on the large side panel, however when this panel is 1600 mm or more we suggest ( and supply ) 2 legs supports.

The Pilasters (face panel) normally do not need a supporting leg, however when the pilaster is 500mm or more we suggest (and supply) a leg support.

Standard cubicles are designed with a 150 mm gap from the floor by using a leg support, however if you do not want any gap and want the cubicle to rest directly on the floor, we can supply an extended size 38 mm “U” channel for this.

The slide bolt “ ind10 ” is supplied with MFC cubicles as standard. The “ ind15 ” ( normally supplied with CGL ) is available as an optional extra. Also note : the ind15 must be fitted with outward opening doors. If you require any additional items please let us know.

The hardware supplied with CGL cubicles

Compact Grade Laminate


An Upgrade Head Rail is available  


Please ask for details


Cubicle Hardware and fittings

Epcot Cubicles : 01325 - 366666      sales@epcot.co

Part of Epcot Leisure Ltd (1979) group of companies, Unit 24, Edward Street, Darlington, Co. Durham DL1 2UP  

Our panels are one piece, however, On your request we can use a “H” section to join the main panels.   

Back to Home Page

01325 - 366666  

Send an email