Epcot Cubicles : 01325-366666

Part of Epcot Leisure Ltd (1979) group of companies

 email : sales@epcotleisure.com

Same Day Price - Super Fast Delivery

 

Home page

 

      Duct Panels and Duct Cabinets

 

To erect a Duct Panel system you will need to build a stud frame. This is to hide all the pipes and any water tanks also to support the Finished boards.

A full height "Duct Panel" system can be built before the cubicle walls are fitted
 

 

 

Alternatively you might decide on a smaller  "Shelf Height Cabinet" which can be fitted after your cubicle walls are installed

Once your stud frame is built ( we recommend in a 4" x 2" timber ( 100mm x 50mm )), it can be covered with a "Frame Cover" made of MFC. If made in a 4" x 2" then you can screw straight through the frame cover into you stud timber ( see W1 ). in this case, there must be sufficient width to be able to hide the screw head once the duct panels are in place.  Our standard size frames covers are 100mm wide and are designed to cover your stud frame so as to "Face it off" ready for the cubicle walls to butt up to. If you use timbers less than 4" x 2" then you must use Angle brackets ( see A1 ) to fix the frame cover in place.  

                        

D1 : shows an example of the cubicle fitted to the duct frame

DF : Shows the suggested fittings required for the duct panels
 

Unit 1, Whessoe Road, Darlington, Co. Durham DL3 0QP

  Epcot Cubicles are part of the Epcot Leisure Group of companies that manufacture and supply the National Trade with Tanning and Leisure Goods Equipment :  www.epcotleisure.com 

Serving the United Kingdom